Wich 3D software to know if my VooDoo2 work well .

Started by mickey, 08 February 2004, 23:29:30

Previous topic - Next topic
Print
Go Down Pages1
User actions

mickey

08 February 2004, 23:29:30
hi,
i am a new member.
i have installed a matrox 4 Mo + VooDoo2 3Dfx 12 Mo on a 233 MMx + 256 Mo Ram :D
and i have some trouble with this installation.
then i would like to know :
Wich 3D software to know if my VooDoo2 work well.
and especially the hardware acceleration.
when i launch Dxdiag.exe he tell me :
------------------------
------------
DxDiag Notes
------------
 DirectX Files Tab: The file directx.cpl is an old version, which could cause problems.
     Display Tab 1: Hardware-accelerated Direct3D 8 is not available because the display driver does not support it.  
You may be able to get a newer driver from the hardware manufacturer. DirectDraw test results: All tests were successful.
Direct3D 7 test results: Failure at step 44 (EnumTextureFormats): HRESULT = 0x887602d0 (error code) Direct3D 8 test results: Display driver does not support API (DDI version too low) Direct3D 9 test results: Display driver does not support API (DDI version too low)

     Display Tab 2: Hardware-accelerated Direct3D 9 is not available because the display driver does not support it.  
You may be able to get a newer driver from the hardware manufacturer. DirectDraw test results: All tests were successful.
Direct3D 7 test results: Failure at step 46 (GetDC): HRESULT = 0x88760249 (Can't create DC) Direct3D 8 test results: Failure at step 5 (GetDeviceCaps): HRESULT = 0x8876086a (3D not available) Direct3D 9 test results: Display driver does not support API (DDI version too low)
------------------------
And Also :
------------------------
---------------
Display Devices
---------------
       Card name: Matrox Millennium PCI
    Manufacturer: Matrox Graphics
       Chip type: 2064W
        DAC type: TVP 3026
      Device Key: Enum\PCI\VEN_102B&DEV_0519&SUBSYS_00000000&REV_01\BUS_00&DEV_0B&FUNC_00
  Display Memory: 4.0 MB
    Current Mode: 1024 x 768 (16 bit)(optimal refresh rate)
         Monitor: GoldStar 1460 Plus VGA
 Monitor Max Res: 1024,768
     Driver Name: mgapdx64.drv
  Driver Version: 4.10.0001.4120 (English)
     DDI Version: 3
Driver Attributes: Final Retail
Driver Date/Size: 8/28/1998 10:57:24, 223232 bytes
     WHQL Logo'd: n/a
 WHQL Date Stamp: n/a
             VDD: *vdd,*vflatd
        Mini VDD: mgapdx64.vxd
   Mini VDD Date: , 0 bytes
Device Identifier: {D7B71ECB-4659-11CF-A873-0120A4C2C935}
       Vendor ID: 0x102B
       Device ID: 0x0519
       SubSys ID: 0x00000000
     Revision ID: 0x0001
     Revision ID: 0x0001
     Video Accel:
Deinterlace Caps: n/a
        Registry: OK
    DDraw Status: Enabled
      D3D Status: Enabled
      AGP Status: Not Available
DDraw Test Result: All tests were successful.
D3D7 Test Result: Failure at step 44 (EnumTextureFormats): HRESULT = 0x887602d0 (error code)
D3D8 Test Result: Display driver does not support API (DDI version too low)
D3D9 Test Result: Display driver does not support API (DDI version too low)

       Card name: 3dfxzone.it FastVoodoo2 4.0 Gold Edition
    Manufacturer:
       Chip type:
        DAC type:
      Device Key:
  Display Memory: 10.0 MB ???????????
    Current Mode:
         Monitor:
 Monitor Max Res:
     Driver Name: 3dfxV2.drv
  Driver Version: 4.11.0001.1150 (English)
     DDI Version: 7
Driver Attributes: Final Retail
Driver Date/Size: 11/18/1999 16:39:14, 40012 bytes
     WHQL Logo'd: n/a
 WHQL Date Stamp: n/a
             VDD:
        Mini VDD:
   Mini VDD Date: n/a, 0 bytes
Device Identifier:
       Vendor ID:
       Device ID:
       SubSys ID:
     Revision ID:
     Revision ID:
     Video Accel:
Deinterlace Caps: n/a
        Registry: OK
    DDraw Status: Enabled
      D3D Status: Enabled
      AGP Status: Not Available
DDraw Test Result: All tests were successful.
D3D7 Test Result: Failure at step 46 (GetDC): HRESULT = 0x88760249 (Can't create DC)
D3D8 Test Result: Failure at step 5 (GetDeviceCaps): HRESULT = 0x8876086a (3D not available)
D3D9 Test Result: Display driver does not support API (DDI version too low)

------------------------
My Monitor is GoldStar 1460 Plus VGA.
Then what is your opinion, sorry for all those détails[8)]
Ooops i did it again !

Shogakusha

#1
09 February 2004, 05:08:31
Dxdiag won't run any of the tests with voodoo 2 or voodoo 1 if you have directx 9 installed, it will run the tests if you have directx 8 installed but there's no reason to do that, as games seem to run fine anyway.  Go to www.futuremark.com and download the 3dmark99 if you want to make sure directx is working on your system, you could try 3dmark2000 but I'm not sure it will work on the voodoo 2.
Comp 1:
-     Windows XP Pro
-     Athlon 2500XP
-     MSI K7N2 Delta motherboard
-     512 meg of 333mhz ram
-     Radeon 9700 Pro
Comp 2:
-     Windows 98 SE
-     Pentium 2 - 333
-     64 meg of pc100 ram
-     Cirrus Logic Laguna 5465 vid card
-     Monster 3d card
Comp3:
-     Windows 98SE
-     Duron 800Mhz
-     192Meg of pc100
-     Voodoo 3 2000

My_Spleen

#2
03 September 2004, 08:12:19
QuoteOriginally posted by mickey

hi,
i am a new member.
i have installed a matrox 4 Mo + VooDoo2 3Dfx 12 Mo on a 233 MMx + 256 Mo Ram :D
and i have some trouble with this installation.
then i would like to know :
Wich 3D software to know if my VooDoo2 work well.
and especially the hardware acceleration.
when i launch Dxdiag.exe he tell me :
------------------------
------------
DxDiag Notes
------------
 DirectX Files Tab: The file directx.cpl is an old version, which could cause problems.
     Display Tab 1: Hardware-accelerated Direct3D 8 is not available because the display driver does not support it.  
You may be able to get a newer driver from the hardware manufacturer. DirectDraw test results: All tests were successful.
Direct3D 7 test results: Failure at step 44 (EnumTextureFormats): HRESULT = 0x887602d0 (error code) Direct3D 8 test results: Display driver does not support API (DDI version too low) Direct3D 9 test results: Display driver does not support API (DDI version too low)

     Display Tab 2: Hardware-accelerated Direct3D 9 is not available because the display driver does not support it.  
You may be able to get a newer driver from the hardware manufacturer. DirectDraw test results: All tests were successful.
Direct3D 7 test results: Failure at step 46 (GetDC): HRESULT = 0x88760249 (Can't create DC) Direct3D 8 test results: Failure at step 5 (GetDeviceCaps): HRESULT = 0x8876086a (3D not available) Direct3D 9 test results: Display driver does not support API (DDI version too low)
------------------------
And Also :
------------------------
---------------
Display Devices
---------------
       Card name: Matrox Millennium PCI
    Manufacturer: Matrox Graphics
       Chip type: 2064W
        DAC type: TVP 3026
      Device Key: Enum\PCI\VEN_102B&DEV_0519&SUBSYS_00000000&REV_01\BUS_00&DEV_0B&FUNC_00
  Display Memory: 4.0 MB
    Current Mode: 1024 x 768 (16 bit)(optimal refresh rate)
         Monitor: GoldStar 1460 Plus VGA
 Monitor Max Res: 1024,768
     Driver Name: mgapdx64.drv
  Driver Version: 4.10.0001.4120 (English)
     DDI Version: 3
Driver Attributes: Final Retail
Driver Date/Size: 8/28/1998 10:57:24, 223232 bytes
     WHQL Logo'd: n/a
 WHQL Date Stamp: n/a
             VDD: *vdd,*vflatd
        Mini VDD: mgapdx64.vxd
   Mini VDD Date: , 0 bytes
Device Identifier: {D7B71ECB-4659-11CF-A873-0120A4C2C935}
       Vendor ID: 0x102B
       Device ID: 0x0519
       SubSys ID: 0x00000000
     Revision ID: 0x0001
     Revision ID: 0x0001
     Video Accel:
Deinterlace Caps: n/a
        Registry: OK
    DDraw Status: Enabled
      D3D Status: Enabled
      AGP Status: Not Available
DDraw Test Result: All tests were successful.
D3D7 Test Result: Failure at step 44 (EnumTextureFormats): HRESULT = 0x887602d0 (error code)
D3D8 Test Result: Display driver does not support API (DDI version too low)
D3D9 Test Result: Display driver does not support API (DDI version too low)

       Card name: 3dfxzone.it FastVoodoo2 4.0 Gold Edition
    Manufacturer:
       Chip type:
        DAC type:
      Device Key:
  Display Memory: 10.0 MB ???????????
    Current Mode:
         Monitor:
 Monitor Max Res:
     Driver Name: 3dfxV2.drv
  Driver Version: 4.11.0001.1150 (English)
     DDI Version: 7
Driver Attributes: Final Retail
Driver Date/Size: 11/18/1999 16:39:14, 40012 bytes
     WHQL Logo'd: n/a
 WHQL Date Stamp: n/a
             VDD:
        Mini VDD:
   Mini VDD Date: n/a, 0 bytes
Device Identifier:
       Vendor ID:
       Device ID:
       SubSys ID:
     Revision ID:
     Revision ID:
     Video Accel:
Deinterlace Caps: n/a
        Registry: OK
    DDraw Status: Enabled
      D3D Status: Enabled
      AGP Status: Not Available
DDraw Test Result: All tests were successful.
D3D7 Test Result: Failure at step 46 (GetDC): HRESULT = 0x88760249 (Can't create DC)
D3D8 Test Result: Failure at step 5 (GetDeviceCaps): HRESULT = 0x8876086a (3D not available)
D3D9 Test Result: Display driver does not support API (DDI version too low)

------------------------
My Monitor is GoldStar 1460 Plus VGA.
Then what is your opinion, sorry for all those détails[8)]
 

secretfj

#3
04 October 2004, 14:17:10 Last Edit: 04 October 2004, 14:17:44 by secretfj
Actually 3DMark 2001SE will run fine with V2
No way a 3DFX collector...just a 3DFX die Hard Player~~

let the VooDoo Roars!!

P4 Extreme Edition 3.4GHz
Asus P5AD2 Deluxe i925x
2GB DDR2 667 DDRRAM
Voodoo 5 5500PCI
Print
Go Up Pages1
User actions