Print Page - i need help with a V5500 agp

Title: i need help with a V5500 agp
Post by: medran on 23 August 2008, 05:56:16

hi sorry for my poor english well..my problem with my 5500 is that i need know the valency of the capacitor C92 i search in google but nothing and here in argentina i dont know nobody with a voodoo 5500 agp

this is a link for the photo of my problem

http://hosting.deimagenes.com/imagenes/a34e54a76dbf65ff3e07b9ee701024c5.JPG

thanks

Title: i need help with a V5500 agp
Post by: Amigamerlin on 07 October 2008, 16:30:41

Hi, for what I can see the broken Chip is placed on the +V line on the pin 8 of the operational LM358.
This Chip is for cleaning the +V. To know the exact value I should unsolder the Chip on a working board take a measure of it and resolder it back. It' a little bit complicated.

Fortunately I've a little bit of experience ;) in this field and I think the correct Value can be 100nF SMD ceramic Capacitor.
Try this value and let me know.

Be Aware: before changing the chip you have to spot the cause that make the chip blowing out !! This blowing is caused by a Short somewhere in your board.

In the picture I can see a Voltage regulator near the blowed capacitor. I think you have to investigate there because maybe it's in short circuit.

Let me know.
Bye

Title: i need help with a V5500 agp
Post by: Glide on 09 October 2008, 10:05:50

Hi Amigamerlin,

many thanks for this info ;)

Bye bye

3dfxzone.it WorldWide Community

3dfx Hardware & Software => Voodoo4/5 Setup and tweaking => Topic started by: medran on 23 August 2008, 05:56:16